(323) 760-7835 info@globalgreenroofing.com Serving Los Angeles, Ventura and Santa Barbara Counties
Drone view of a two-story home with a newly installed charcoal architectural shingle roof at golden hour

Roofing done right, built to last

Roofing Contractor in Los Angeles, CA

Your roofing contractor in Los Angeles for roof repair, roof replacement, inspections and cool roofing on homes and businesses. Shingle, tile, metal and flat roofs, with a written proposal before any work starts.

Repair and replacement Cool and solar-ready roofs Photo-documented inspections

Global Green Roofing is a roofing contractor in Los Angeles, CA for roof repair, roof replacement, inspections and new roofs on homes and commercial buildings. Call (323) 760-7835 or send the contact form to book an on-site assessment; you receive a written proposal before anything is decided.

About Us

Global Green Roofing is a full-service roofing company for homes and businesses in Los Angeles, Ventura and Santa Barbara Counties. We handle the whole life of a roof: an inspection that tells you where it stands, repairs that fix the cause instead of the symptom, maintenance that keeps small problems small, and a complete replacement when the roof has reached the end of its useful life.

The green in our name is a promise about how we build: roofs that keep heat out, last longer and are ready for solar, so a new roof lowers the load on your home instead of adding to it.

Roofing crew installing new shingles together on a sloped roof

Repair, replacement and new roofs

From one failed pipe boot to a complete tear-off, done to the manufacturer's instructions.

Reflective white roof beside solar panels

Cool-rated options on every roof

Cool-rated materials, balanced ventilation and solar-ready layouts offered on every roof.

Inspector checking chimney flashing with a tablet

Inspections you can actually use

A photo report grouped into fix now, watch, and fine, with the roof's remaining life.

Work truck with ladders and roofing materials in front of a home

Clean, organized jobsites

Protected landscaping, daily cleanup and a final walkthrough with you when the work is done.

Our services

Roofing services, and which one you need

Most calls start with a leak or an aging roof. A leak on a roof that is otherwise sound usually needs a roof repair. Repeated leaks, brittle or bare shingles, cracked tiles across several slopes or a deck that feels soft point to a roof replacement. If you cannot tell which you are facing, start with a roof inspection: it shows what needs fixing now and what can wait.

Gloved hands fastening a replacement shingle with a nail gun during a roof leak repair

Roof Repair

Leaks, storm damage, flashing and broken shingles or tiles, fixed at the source.

Right call when: A single leak or damaged area on a roof that is otherwise in good shape.

Learn more
Roofer laying new charcoal shingles over fresh synthetic underlayment during a full roof replacement

Roof Replacement

Tear-off to the deck and a complete new roofing system when repairs no longer make sense.

Right call when: Leaks in several places, a sagging or soft deck, or a roof near the end of its service life.

Learn more
Roof inspector with a tablet checking chimney flashing on a tile roof while a drone captures photos

Roof Inspection & Maintenance

A photo report of your roof's condition, and maintenance that keeps small problems small.

Right call when: Buying or selling a home, after a big storm, or when you are not sure what the roof needs.

Learn more
Roofers installing solar panels beside a white reflective low-slope roof

Cool Roofing

Rated cool shingles, tile, metal and membranes, ventilation, and roofs planned for solar.

Right call when: A hot attic, high cooling bills, a re-roof in a Title 24 cool-roof zone, or solar coming up.

Learn more
Roofer setting terracotta clay tiles in rows on battens over new underlayment

Tile Roofing

Clay and concrete tile roofs: new installs and re-roofs that keep your original tiles.

Right call when: A tile roof with worn-out underlayment, or a Spanish or Mediterranean-style new roof.

Learn more
Roofers working on the clay tile roof of a Spanish-style home with a courtyard, seen from a drone

Tile Roof Repair

Cracked and slipped tiles, leaks at valleys and flashing, and local underlayment repairs.

Right call when: A leak or broken tiles on a tile roof whose underlayment is still sound overall.

Learn more
Two roofers in harnesses installing charcoal standing-seam metal roof panels

Metal Roofing

Standing-seam and stone-coated steel: long life, light weight and clamp-on solar mounting.

Right call when: A long-term roof, a modern look, a fire-prone area, or a home planning solar.

Learn more
Roofer heat-welding the seam of a white TPO membrane on a flat commercial roof

Flat Roofing

New flat and low-slope roofs: TPO and other membranes, insulation and drainage.

Right call when: A flat roof at the end of its life, widespread leaks, or ponding that repairs have not fixed.

Learn more
Crew working on the white membrane flat roof of a commercial building, seen from above

Flat Roof Repair

Ponding, blisters, open seams and flashing leaks on flat and low-slope roofs.

Right call when: A leak, blister or open seam on a flat roof that is otherwise in fair condition.

Learn more
Roofers in hard hats working on a slate roof above a neighborhood at dusk

Not sure what your roof needs?

Book an on-site assessment. We inspect, photograph what we find and explain it in plain words, then you decide.

Standing-seam metal roof with solar panels on a modern farmhouse
Clay tiles being laid on battens

Every roof type

Which roof type fits your house?

Architectural asphalt shingles cost less upfront than metal, which the Metal Roofing Alliance itself acknowledges. Clay and concrete tile suit Spanish and Mediterranean architecture and can last for generations when the underlayment beneath them is maintained. Standing-seam metal is light, long-lived and a natural base for solar. Low-slope sections need a continuous membrane such as TPO, never shingles.

We walk you through the options that fit your roof's structure, your budget and how long you plan to stay, including cool-rated versions of each, before you commit to anything.

Real jobs

Recent work

Photos from our own job sites. Tap a job to see every photo.

Photos on Yelp
Photos on Yelp

Roofing systems we offer

Illustrations of the shingle, tile, metal and flat roofs we offer, each installed as a complete system: deck, underlayment, flashing, ventilation and the covering you choose.

How it works

How a roofing project with Global Green works

Four steps from your first call to a finished roof, with everything that matters written down.

  1. You call or send the form

    Tell us what you are seeing: a stain, a drip, missing shingles or tiles, or an older roof you want to plan for.

  2. On-site assessment

    We inspect the roof and, where we can, the attic, and photograph what we find.

  3. Written proposal

    The roofing system and the full scope in writing, so you can compare bids like for like.

  4. The work

    Permits where required, a clean jobsite, and a final walkthrough when the roof is done.

Roofing guides

California rules to know before you re-roof

Three rules decide more California re-roofs than any sales pitch: the Title 24 cool-roof requirement, the Class A fire rating in high fire hazard zones, and the building permit. Each guide quotes the code it relies on. More in our roofing guides.

Roofers installing solar panels beside a white reflective low-slope roof

Cool Roof Requirements in California: What Title 24 Asks of a Re-Roof

Which re-roofs it covers, the values, and the exceptions.

Read the guide
Three roofers in harnesses on the grey shingle roof of a single-story contemporary home

What Is a Class A Fire Rated Roof, and When Does California Require One?

The rating, the roofs that qualify, and when it applies.

Read the guide
Roofers on a shingle roof above a work truck loaded with ladders and roofing materials

Do You Need a Roofing Permit in California?

Yes for a re-roof. What it checks and who pulls it.

Read the guide

Roofing in Los Angeles

What a re-roof in the City of Los Angeles has to meet

Four city rules, on top of the state code, shape most roofing jobs inside Los Angeles city limits:

  • An express permit from LADBS. The Department of Building and Safety issues re-roof permits for Class A or B roofing under 6 pounds per square foot as express permits, online or by appointment at its counters, with no plan check. The city's building code exempts work valued at $2,500 or less, unless it affects the structure or public safety.
  • The city's own cool roof rule. Replacing more than half of a home's roof calls for a product rated by the Cool Roof Rating Council in every part of the city, coastal ZIP codes included: an aged solar reflectance of at least 0.25 on pitched roofs and 0.65 on low-slope roofs, higher than the state's Title 24 values of 0.20 and 0.63 where those apply (the state sets no pitched-roof value in coastal zone 6). LADBS lists a tile lift and relay, where the same tiles go back over new underlayment, with no cool roof requirement. See cool roofing for rated products.
  • No wood shakes anywhere, and Class A in the fire zone. Wood shake and wood shingle roofs are not permitted anywhere in the city. A March 2025 City Council motion counts about 101,600 acres as Very High on CAL FIRE's 2025 map, about a third of the city's land by our calculation, and there LADBS's fire-zone checklist calls for a Class A roof, repaired sections included (what Class A covers).
  • Historic districts first. In a Historic Preservation Overlay Zone, City Planning approves exterior work, re-roofing included, before it starts, even when no building permit is needed.

Two neighborhoods have their own pages because their searches and rules differ from the rest of the city: Encino, in the San Fernando Valley's climate zone 9 and among the communities LAFD lists with portions in the Very High fire zone, and Pacific Palisades, in coastal zone 6 and rebuilding after the 2025 Palisades Fire.

Sources: LADBS express permits and fire zone checklist; Los Angeles Municipal Code 91.106, 91.1505.1 and 99.04.106.5; City Council File 10-2468-S1; City Planning, HPOZ project review. Read October 1, 2026.

Why choose us

Everything in writing

Your proposal names the roofing system, the materials and every part of the scope, so you can compare bids like for like.

You see what we see

Photos of your roof and the problem areas, explained in plain words, before you decide on anything.

Honest repair or replace

If a repair will do, we say so. If the roof is failing everywhere, we show you why patching will cost more.

Energy-smart options

Cool-rated products, better ventilation and solar-ready layouts are part of every conversation, not an upsell.

Service areas

Roofing across Los Angeles, Ventura and Santa Barbara counties

Our home base is Los Angeles, and we also work in the cities below, from Long Beach to Santa Barbara. Each city page covers what changes a roof job there: who issues the permit, the Title 24 climate zone, the fire hazard map and fire rebuilding rules, and the age of the homes.

FAQ

Roofing questions we hear most

How do I know if I need a roof repair or a replacement in Los Angeles?

A single leak or local damage on an otherwise sound roof is usually a repair. Leaks in several places, widespread wear, a soft deck or repeated leaks in the same spot point toward replacement. Our inspection report shows which applies and why.

What types of roofs do you work on?

Asphalt shingle, clay and concrete tile, standing-seam and stone-coated steel, and flat or low-slope roofs with TPO and other membranes, on homes and commercial buildings.

Do I need a cool roof when I re-roof in Los Angeles?

Usually, when more than half of a home's roof is replaced inside the City of Los Angeles: the city's green building code calls for a rated product with an aged solar reflectance of at least 0.25 on pitched roofs and 0.65 on low-slope roofs, in every ZIP code. The code exempts roof repairs, replacements where solar is being installed and roofs with at least 25 pounds per square foot of thermal mass over the membrane, such as green roofs, and LADBS lists a tile lift and relay that puts the same tiles back with no cool roof requirement.

What is a cool roof?

A roof built with materials that reflect more sunlight and release absorbed heat faster, rated by the Cool Roof Rating Council on solar reflectance and thermal emittance. In several California climate zones the energy code requires one when more than half of a roof is replaced.

How do I compare roofing companies in Los Angeles?

Ask every roofer the same questions and get the answers in writing: what comes off and what goes on, layer by layer; that the permit is in place before work starts where the city requires one; and whether the roof will be Class A where your address is in a fire zone. Written answers from roofers in LA let you compare proposals like for like. What a roof replacement proposal should include.

How do I get an estimate?

Call (323) 760-7835 or send the contact form. We schedule an on-site assessment and send a written proposal that spells out the system and the scope.

See all frequently asked questions

Contact us

Let's talk roofs

Tell us what is going on with your roof. We will schedule an on-site assessment and send a written proposal before anything is decided.

Call(323) 760-7835Emailinfo@globalgreenroofing.com
ServingLos Angeles, Ventura and Santa Barbara Counties
HoursEvery day: 8 AM to 9 PM

Request an estimate

Prefer to talk? Call (323) 760-7835.

Instant Roof Quote